A burst pipe is not a rare occurrence. It is a common problem in the world, and people suffer from Burst Pipe Brighton at least once in their lifetime.
If you are one of those who have already suffered from Burst pipes, then you must know about the causes of burst pipes so that they can be avoided in future.
In this article, we will discuss some common causes of Burst Pipe and how to prevent them from happening again:
The Water Pressure Is Too High
If you have a Burst Pipe Brighton, the first thing to check is the water pressure. High water pressure can cause pipes to burst, and if it is not properly checked, it could lead to additional damage by causing other leaks in your home. The most common causes of high water pressure are:
- A clogged toilet
- A clogged sink
- A clogged shower
- A clogged bathtub
Erosion in the Walls of the Pipes
The walls of the pipes are worn out due to exposure to corrosive elements, high temperatures, vibrations and high pressure.
- Corrosion-related erosion is caused when the lining inside the pipe erodes due to exposure to excessive moisture or salt in the air.
- The corrosive elements can be acidic or alkaline. If you live in a place where there’s a lot of humidity, it will be more likely for your piping system to experience corrosion-related erosion.
- Heat-related erosion is caused when hot water passes through your piping system at a high temperature for long periods of time without any cooling happening during this process (which happens when your home has been without heating for a while).
- For example, It would not be uncommon for someone living in a house that only heats one room (e.g., basement) with its own furnace/boiler system if that person needs access to other parts of their home because they don’t want these places freezing over during wintertime periods where no heat may flow from those areas until spring arrives again.
- This could lead to problems such as burst pipes since it’s likely going cause too much stress on them over time due to constant heating cycles being turned on/off repeatedly each day which causes cracks within their structure.
The Age of the Pipe Is too old.
If you have a pipe that is more than 50 years old, then it is likely to burst. The age of the pipe is important because, over time, water can corrode and damage pipes. This causes leaks in your plumbing system and causes them to burst at any point in time.
If you are unsure about whether your pipes are aging or not, call a plumber who can check on your Burst Pipe Brighton.
Conclusion
If you want to avoid bursting pipes, it is best to keep a close eye on your home’s plumbing system. You should also contact a plumber if you notice any of the signs above.
