Inefficient laboratory operation is the cause of the poor maintenance of the centrifuge.
A centrifuge is a piece of equipment that rotates the samples at a very high speed, which forces the heavier particles to accumulate in the lower part of the tube.
The centrifuge manufacturers in Ahmedabad provide the varioussize of the models, from desktop models to point-of-care systems. Professional laboratory instruments manufacturers in Ahmedabad offer new and renewed models of centrifuges from renowned manufacturers in the industry.
Centrifuges are used to spin liquid samples. For the confirmation sample, one of the main priorities to achieve successful results this is very useful. Only proper maintenance of this is crucial to creating a safe environment for laboratory workers.
Tips and tricks to maintain the centrifugation’s success
As I am suggesting some tips and tricks get the successful operation of the centrifuge. I made a list of the tips and you will definitely understand this.
- Size matters a lot:
The perfect size of the tube avoids the loss or loss of samples and allows easy recovery of the sample.
The correct size tube for the correct centrifuge is critical for successful centrifugation. The use of the wrong tube size can cause the tube to break and the sample to be destroyed.
Determine if the recommended sample volume and maximum speed comply with your protocols and confirm chemical compatibility with your sample.
- Choose right equipment :
There are many types of centrifuges available, and it is important to select the right one to ensure the success of your turns and analysis. Some centrifuges are very typical as to what they can achieve, and others are general purpose, allowing you to complete many different types of centrifuge turns.
- Get the right rotor:
The rotors are designed to fit and work properly in a designated centrifuge.
Once you have determined the correct force, select the rotor that will obtain the desired result. Some manufacturers offer rotor recognition that identifies the rotor and ensures that it will work with the centrifuge.
- Determine the perfect application:
It is a value without units and is used to compare separation and sedimentation performance.
Your application will specify the degree of acceleration. The degree of acceleration is measured by the relative centrifugal force.
- Centrifuge lid security is needed:
Securing the centrifuge lid before centrifugation ensures a secure seal. This helps ensure a safe work environment in the laboratory.
- Balance the load of the centrifuge:
When placing the tubes in the centrifuge, it is important that the tubes are balanced to receive accurate results.
Always take an empty tube of the same size and fill it with water to the same volume. With the proper scientific approach, you can maintain your centrifuge, because every centrifuge manufactures in Ahmedabad make those with the best possibility to use in the laboratory.
